Another garment piece on our particular dungaree range that uses exquisite American selvedge denim loomed in the up and rising Vidalia Mills of Louisiana. Loomed on their infamous Draper X3 shuttle looms; the same exact shuttle looms which were used to make the legendary White Oak Cone denim for many years before the close-down. The denim is weighted at 14 oz. / sq. yard and we decided to leave ‘em on their untouched loom-state condition. This is the real deal kind of American selvedge denim that still holds the genuine and pristine kind of characters. The denim really has a nice hairy texture and has a soft hand-fell resulted from the ring spun yarns.
The denim is pretty impressive on its versatility and flexibility level. It can adapt to several range of our garment patterns with no problem at all. This is one of the main traits of a classic denim fabric. This denim article is built using our 7.75” Cut. Our current signature run of a classis slim-fitted jean cut. Maintaining the medium-rise built to keep the comfortable level where it won’t interfere you on doing your daily duty.
Trimmed using our signature Scovill USA open top buttons in burnt copper finish. Reinforced with 100% copper rivets also from Scovill Fastener Company. The leather patch was made using our signature leather that we’ve faithfully utilized since 2011, the veg-tanned horse strips from the widely known Horween Leather Company of USA.
*This Vidalia denim might have some minor imperfections (subtle chatters, etc) and do consider it as the beauty of imperfection and acknowledgement towards their progress.
~ 14 oz indigo selvedge denim
~ Milled in Louisiana, USA
~ Vidalia Mills denim
~ Loom-state unsanforized
~ Made using Draper X3 Shuttle Loom
~ 100% cotton
~ USA E-3 certified Cotton
~ Ring X Ring denim
~ Red and white selvedge line
~ Hickory stripe pocket lining fabric
~ Slim cut with medium rise
~ Copper plated open top buttons from Scovill USA
~ 100% copper washer-burr rivets from Scovill USA
~ Hidden rivets
~ Raised belt loop
~ Raised back pockets
~ Coin pocket selvedge
~ Veg tanned Horween USA Horse Strips patch
~ 6-7 oz Horse Hide thickness in average
~ Open seam construction (with the selvedge line) from bottom to top
~ Two-tone double felled inseam construction
~ Two-tone chainstitched hem
|*measurements are in inches, all measured pre-soak
*expect 3-5% shrinkage
*may slightly differ each pairs, as they’re cut and sewn with hands
Check our measurement guide video for more detailed step by step on how to measure : Oldblue 101 – The Measurement Guide